Latest aluminum tape Tenders | Government aluminum tape Tenders

CTN :45549425

06 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For corrigendum : supply of polyglass banding tape size-0.33 mm. +/- 0.05 thick x 20mm wide.specification: as per rdso spec. no,spec/e-7/17,rev.''1'' may 2004. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45743750

06 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of polyglass banding tape size-0.33 mm. +/- 0.05 thick x 20mm wide.specification: as per rdso spec. no,spec/e-7/17,rev.''1'' may 2004. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45691737

06 Jul, 2026 NA

Hoigebazar - West Bengal

Tender For supply of aluminum tape (q3)

CTN :45639621

13 Jul, 2026 NA

Gangtok - Sikkim

Tender For supply of puf insulated hdpe water storage tank 500 ltr , puf insulated hdpe water storage tank 750 ltr , puf insulated hdpe water storage tank 2000 ltr , puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick , puf insulated ppr pipe 32 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , ppr elbow pn 20pipe 3 layer -32 mm size , ppr elbow pn 20pipe 3 layer -20 mm size , ppr tee pn 20pipe 3 layer -32 mm size , ppr tee pn 20pipe 3 layer -20 mm size , ppr union pn 20pipe 3 layer -32 mm size , ppr union pn 20pipe 3 layer -20 mm size , ppr half bend- 32 mm size , ppr half bend- 20 mm size , temperature differential controller for automatic on and off operation of heat tape , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire , aluminum tape , 2.5 hp single phase open well submersible pump set complete , direct-on-line starter control panel for 2.5 hp single phase openwell submersible pump set

CTN :45639643

13 Jul, 2026 5.13 Lacs

Gangtok - Sikkim

Tender For supply of puf insulated hdpe water storage tank 500 ltr , puf insulated hdpe water storage tank 750 ltr , puf insulated hdpe water storage tank 2000 ltr , puf insulated ppr pipe of size 32 mm- pn 20, 3 layer, puf insulation-40mm thick , puf insulated ppr pipe 32 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , puf insulated ppr pipe 20 mm od with self regulating heat tape 35 watt per mtr and m 20 connectors ppr pipe - pn 20 , puf insulation - 40 mm. , ppr elbow pn 20pipe 3 layer -32 mm size , ppr elbow pn 20pipe 3 layer -20 mm size , ppr tee pn 20pipe 3 layer -32 mm size , ppr tee pn 20pipe 3 layer -20 mm size , ppr union pn 20pipe 3 layer -32 mm size , ppr union pn 20pipe 3 layer -20 mm size , ppr half bend- 32 mm size , ppr half bend- 20 mm size , temperature differential controller for automatic on and off operation of heat tape , pt 100 sensor with 10 mtr signal wire , 3 core 1.5 sqmm copper wire , aluminum tape , 2.5 hp single phase open well submersible pump set complete , direct-on-line starter control panel for 2.5 hp single phase openwell submersible pump set

CTN :45605186

02 Jul, 2026 2.75 Crore

Kondagaon - Chhattisgarh

Tender For supply of furniture and internal fitouts for permanent campus of jnv kondagaon (chhattisgarh) - discription of work, school building, (a) classroom, (i) classroom desk large sizesupply & installation big desk (for two persons)-the overall dimensions of desk will be 1066mm * 930mm * height 760mm, complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 900 mm x d 380 mm. edge towards bench shall be post formed with round edge. the remaining three edges must be sealed with 2mmthick pvc edge banding tape. edge band must be trimmed on edges and corners. the desk shall be have low chemical emission of vocs (voltage organic compounds) and carcinogens, contributing to a healthier room environment. seat and back rest shall be made of 18mm thick plywood of mr grade osl (one side shall be laminated, and other side shall have balancer finish) except back rest. back rest shall be have both sides colour lamination.technical details of seat and back rest are mentioned below:seating bench dimensions shall l 930 mm x w 300 mm. front side shall be rounded with post forming. remaining three edges shall sealed with 2mm thick pvc edge banding tape.back rest dimensions shall l 930 x h 200 mm upper side shall be rounded with post forming remaining three edges shall be sealed with 2mm thick pvc edge banding tape. desk shelve shall be made of prime quality 0.8mm thick crca sheet of h150mmxd300mm and side stiffeners of crca tube size 19mmx19mmx1mmthick. one vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . upper modesty made of prime quality 0.8mm thick crca sheet powder coated should be embossed with dimples in round shape, height will be 150mm, there should be perforated lower modesty made of prime quality 0.8 mm thick crca sheet of size h150mmxd21mm with square perforation, crca tube of size 19x19x1mm thick to be inserted for full length at bottom of jali . bag hook should be provide on both side of piller made of minimum 4mm dia rod side frame structure:- made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick crca tube , seat and back side frame structure made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick erw-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick crca pipes. .bottom rectangular tube 50x25x 1.2mm thick should be closed with ppcp cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (backside) and other side (undertheseat) ppcp cap, complete as per engineer incharge desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 0.8) gm/m , automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating., (ii) classroom desk medium sizesupply & installation medium desk (for two persons)-the overall dimensions of desk will be 900mm w 5 x 890mm d 5 x 688/420mm h 5 , complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 870 mm

Central Government/Public Sector

CTN :45593347

27 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For adhesive aluminum tape, backing (aluminium foil) thickness: 0.050 mm(minimum) .

CTN :45590635

08 Jul, 2026 NA

Indore - Madhya Pradesh

Tender For supply of double sided tape (q4) , aluminum tape (q3)

CTN :45473710

01 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of polyglass banding tape size- 0.33 mm. +/- 0.05 thick x 20mm wide. specification/drg: as per rdso spec. no. spec/e-7/17, rev. ''1'' may 2004. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45348662

17 Jun, 2026 NA

Mundra - Gujarat

Tender For supply of aluminum tape (q3)

Aluminum Tape Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector